Page 15 - EEC_HeavyDutyDesk
P. 15
Drawers and Angles
Equipment and Storage Drawers
Equipment and Storage drawers, unlike desk compartment draw-
ers, are designed to house test equipment, recorders, tape decks
and operational gear. The drawers ride on ball bearing extension
slides having front disconnect. The drawer pulls are flush mount-
ed with recessed finger grip.
Product Features Equipment and Storage Drawers Desk Systems
4 Constructed of 20-gauge steel
4 Available in 6 drawer heights
4 Available in 25 1/2” and 30 3/4” depths
EQUIPMENT & STORAGE DRAWERS*
Height of 19” 24”
Vertical Mounting Rails Drawer Front Panel Width Panel Width
All of Equipto’s Electronic Compartments are supplied with four For frames with a 25 1/2” depth
punched vertical mounting rails, two are located at the front and
two at the rear of the compartment. You may require additional 3 1/2” 14-0313-11 14-0323-11
rails or you may substitute tapped rails for punched rails. Please
see the table below to select the part number of the mounting rails 5 1/4” 14-0513-11 14-0523-11
you need to fit the electronic compartment you are using. The
Rails are furnished plated. 7” 14-0713-11 14-0723-11
Product Features 8 3/4” 14-0813-11 14-0823-11
4 Constructed of 11-gauge steel 10 1/2” 14-1013-11 14-1023-11
4 Holes are on Universal E.I.A. Standard RS-310.
14” 14-1413-11 14-1423-11
Punched for Speed Nuts® or tapped 10-32 on face leg
For frames with a 30 3/4” depth
4 Edge-rolled to eliminate sharp edges
3 1/2” 14-0314-11 14-0324-11
5 1/4” 14-0514-11 14-0524-11
7” 14-0714-11 14-0724-11
8 3/4” 14-0814-11 14-0824-11
10 1/2” 14-1014-11 14-1024-11
14” 14-1414-11 14-1424-11
*Add a ‘T” to the front of the Drawer part number if it
will be mounted in a desk that has Tapped rails.
VERTICAL MOUNTING RAILS
Overall Height Height of For Front or Rear
of Desk Panel Openings (plated)
Assembly Space Punched Tapped
26” 14” 01-1401-02 01-1402-02
30” 17 1/2” 01-1701-02 01-1702-02
30” 21” 01-2101-02 01-2102-02
“Universal” hole spacing for mounting instrument panels was
first developed by Equipto Electronics Corporation engineers.
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote E15
Equipment and Storage Drawers
Equipment and Storage drawers, unlike desk compartment draw-
ers, are designed to house test equipment, recorders, tape decks
and operational gear. The drawers ride on ball bearing extension
slides having front disconnect. The drawer pulls are flush mount-
ed with recessed finger grip.
Product Features Equipment and Storage Drawers Desk Systems
4 Constructed of 20-gauge steel
4 Available in 6 drawer heights
4 Available in 25 1/2” and 30 3/4” depths
EQUIPMENT & STORAGE DRAWERS*
Height of 19” 24”
Vertical Mounting Rails Drawer Front Panel Width Panel Width
All of Equipto’s Electronic Compartments are supplied with four For frames with a 25 1/2” depth
punched vertical mounting rails, two are located at the front and
two at the rear of the compartment. You may require additional 3 1/2” 14-0313-11 14-0323-11
rails or you may substitute tapped rails for punched rails. Please
see the table below to select the part number of the mounting rails 5 1/4” 14-0513-11 14-0523-11
you need to fit the electronic compartment you are using. The
Rails are furnished plated. 7” 14-0713-11 14-0723-11
Product Features 8 3/4” 14-0813-11 14-0823-11
4 Constructed of 11-gauge steel 10 1/2” 14-1013-11 14-1023-11
4 Holes are on Universal E.I.A. Standard RS-310.
14” 14-1413-11 14-1423-11
Punched for Speed Nuts® or tapped 10-32 on face leg
For frames with a 30 3/4” depth
4 Edge-rolled to eliminate sharp edges
3 1/2” 14-0314-11 14-0324-11
5 1/4” 14-0514-11 14-0524-11
7” 14-0714-11 14-0724-11
8 3/4” 14-0814-11 14-0824-11
10 1/2” 14-1014-11 14-1024-11
14” 14-1414-11 14-1424-11
*Add a ‘T” to the front of the Drawer part number if it
will be mounted in a desk that has Tapped rails.
VERTICAL MOUNTING RAILS
Overall Height Height of For Front or Rear
of Desk Panel Openings (plated)
Assembly Space Punched Tapped
26” 14” 01-1401-02 01-1402-02
30” 17 1/2” 01-1701-02 01-1702-02
30” 21” 01-2101-02 01-2102-02
“Universal” hole spacing for mounting instrument panels was
first developed by Equipto Electronics Corporation engineers.
Visit our web site at www.equiptoelec.com for the latest technical data or a price quote E15
