Page 14 - EEC_HeavyDutyDesk
P. 14
Desk
Cable Compartment Panels
Systems Drop Doors/Outlet Strips/Screws
The Cable Compartment Panels are used when only occasional Compartment Panel
access is needed. Four Phillips head, mar-proof screws secure the
panel. Two doors or panels are required when double compart- Drop Doors
ments are ordered.
Drop Doors are designed with a top center latch which engages at
the top and has a continuous hinge at the bottom. They are rec-
ommended when frequent access to the cable compartment is
needed. They are shipped attached to the compartment.
Product Features
4 Constructed of 16-gauge steel
4 Panels supplied in flat 1/8” thick steel or aluminum or
formed 5/8” thick 16-gauge steel
4 Available in 26” and 30” Desk Heights
4 Panel opening is 19 1/16” and 24 1/16”
DROP DOORS AND FORMED PANELS
Panel Overall Drop Formed FLAT PANELS**
Doors Panels
Opening of Height Panel Overall 1/8” 1/8”
Aluminum
Compartment of Desk Opening of Height Steel Panel
Panel
19 1/16” 26 20-1018-46 20-1012-46 Compartment of Desk
21-1012-4_
19 1/16” 30 20-1418-46 20-1412-46 19 1/16” 26 21-1012-1_ 21-1412-4_
19 1/16” 30 21-1412-1_ 21-1022-4_
24 1/16” 26 20-1028-46 20-1022-46 24 1/16” 26 21-1022-1_ 21-1422-4_
24 1/16” 30 21-1422-1_
24 1/16” 30 20-1428-46 20-1422-46
Mar-Proof Screws Complete the last digit of the panel P/N with the following choices:
For punched Panel Mounting Angles, screw 10B x 1 1/8” (80- 2 with hardware for Punched vertical rails
0201-05) is used with 5/8” formed panels, while 10B x 5/8” (80- 4 with hardware for Tapped vertical rails
0202-05) is used with 1/8” flat panels. Screws are zinc-plated and
Speed Nuts® (80-0401-03) have a double coat of aluminum paint. Outlet Strip
If tapped Panel Mounting Angles are used, the 1/8” Flat or 5/8” The Equipto Outlet Strip is a wired, heavy duty 6 outlet strip
Formed Instrument Panels are fastened to the mounting angles with switch and UL approved components. The long-lasting
with 10-32 x 1” (80-0101-05) Phillips Head machine screws. 1/8” indicator lamp denotes “power on”.
Flat Panels are fastened with 10-32 x 1/3” (80-0102-05) machine The box contains a 15 amp
screws. All screws abovee have Mar-Proof recessed black nylon circuit breaker with a 12’ long
washers. 3-wire grounded service cord.
80-0202-05 80-0201-05 80-0102-05 80-0101-05
80-0401-03
For mounting Flat or 5/8” Formed Instrument Panels
E14 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.859.78404Fax 630.897.5314
Cable Compartment Panels
Systems Drop Doors/Outlet Strips/Screws
The Cable Compartment Panels are used when only occasional Compartment Panel
access is needed. Four Phillips head, mar-proof screws secure the
panel. Two doors or panels are required when double compart- Drop Doors
ments are ordered.
Drop Doors are designed with a top center latch which engages at
the top and has a continuous hinge at the bottom. They are rec-
ommended when frequent access to the cable compartment is
needed. They are shipped attached to the compartment.
Product Features
4 Constructed of 16-gauge steel
4 Panels supplied in flat 1/8” thick steel or aluminum or
formed 5/8” thick 16-gauge steel
4 Available in 26” and 30” Desk Heights
4 Panel opening is 19 1/16” and 24 1/16”
DROP DOORS AND FORMED PANELS
Panel Overall Drop Formed FLAT PANELS**
Doors Panels
Opening of Height Panel Overall 1/8” 1/8”
Aluminum
Compartment of Desk Opening of Height Steel Panel
Panel
19 1/16” 26 20-1018-46 20-1012-46 Compartment of Desk
21-1012-4_
19 1/16” 30 20-1418-46 20-1412-46 19 1/16” 26 21-1012-1_ 21-1412-4_
19 1/16” 30 21-1412-1_ 21-1022-4_
24 1/16” 26 20-1028-46 20-1022-46 24 1/16” 26 21-1022-1_ 21-1422-4_
24 1/16” 30 21-1422-1_
24 1/16” 30 20-1428-46 20-1422-46
Mar-Proof Screws Complete the last digit of the panel P/N with the following choices:
For punched Panel Mounting Angles, screw 10B x 1 1/8” (80- 2 with hardware for Punched vertical rails
0201-05) is used with 5/8” formed panels, while 10B x 5/8” (80- 4 with hardware for Tapped vertical rails
0202-05) is used with 1/8” flat panels. Screws are zinc-plated and
Speed Nuts® (80-0401-03) have a double coat of aluminum paint. Outlet Strip
If tapped Panel Mounting Angles are used, the 1/8” Flat or 5/8” The Equipto Outlet Strip is a wired, heavy duty 6 outlet strip
Formed Instrument Panels are fastened to the mounting angles with switch and UL approved components. The long-lasting
with 10-32 x 1” (80-0101-05) Phillips Head machine screws. 1/8” indicator lamp denotes “power on”.
Flat Panels are fastened with 10-32 x 1/3” (80-0102-05) machine The box contains a 15 amp
screws. All screws abovee have Mar-Proof recessed black nylon circuit breaker with a 12’ long
washers. 3-wire grounded service cord.
80-0202-05 80-0201-05 80-0102-05 80-0101-05
80-0401-03
For mounting Flat or 5/8” Formed Instrument Panels
E14 Equipto Electronics Corp.4Aurora, IL4800.204.72254630.859.78404Fax 630.897.5314
